1.Brief Introduction
Items | NeoDen PM3040 |
Dimensions | 580×320×260mm |
Platform Size | 300×400mm |
PCB Size | 250×300mm |
Template Size | 370×470mm |
Printing speed | Labor control |
PCB Thickness | 0~100mm |
PCB Tuning range | Front/ Side +10mm |
Platform height | 180mm |
Repeatability | ±0.01mm |
Positioning mode | Outside/Reference hole |
Fine Adjustment Range | Z-axis ±45mm X-axis ±35mm Y-axis ±45mm |
Weight | 14Kg |
2. Features
1). The same platform as printer can be selectable,easy to locate both single and double sides of PCB board,high flexibility ensure high printing precision;
2).The steel stencil can be rotated 30 degrees at most,and the precision can be kept all the way when repeat works,can be comparable with automatic machine;
3). using the way of steel stencil movement to adjust the best position,combining with the fine adjustment of X-axis,Y-axis to correct, convenient and efficient;
4). The frame made of thickened sheet metal,finest material,good quality with outstanding durability; the brackets using the bolt bar to adjust the height, convenient for controlling the thickness of PCB.
3. Instruction
A. PCB Positioning
View the position between PCB board and the steel stencil,find out the most suitable position to locate the PCB board
on the platform,
Suggestion:paste a bit double sides adhesive tape to stick the PCB well if the position between PCB and steel stencil
confirmed
→install the steel stencil on the locating slot of the frame
→paste double sides adhesive tape on the opposite side of board
→pressing the steel stencil→install the filler in the appropriate place between platform and PCB board
→adjust the distance between the steel stencil and filler till the same thickness as PCB board(anastomose the PCB and filler),to ensure the PCB board and filler is parallel
→tear the paper of double sides adhesive tape which pasted previous on the PCB board
→close the steel stencil till the PCB board cement with the filler
→lift the steel stencil→the PCB separate from the steel stencil and paste together in the filler of platform
→find out the applicable positioning pin and install them into the fixation unit(the height of positioning pin do not exceed the thickness of PCB board)
→lock the fixation unit tightly on the platform after positioning pin installed into the fixation unit with fastening,the PCB
positioning operation almost finished
→adjust the best position between platform and PCB board by using the X-axis adjustment handle and Y-axis adjustment handle